Does your Holiday
Villa suffer from damp, stains, mold or salting on the walls inside?
Contact us if you
need help with damp - 01626 872886 .
If you'd like to
send us the details of your problem complete our Dampness
questionnaire.
We are long term
members of the PCA - The Property
Care Association - the professional body for the Damp Proofing industry
and our Dampness Surveyors have over 50 years of experience between
them.
Want Help
choosing a Contractor - E: Mail us at help@propertyrepairsystems.co.uk
VILLA DAMPNESS PROBLEMS
The Mediterranean construction
method, (concrete frame with rendered hollow block infill panels), suffers
from five main problems. We have simple, effective Guaranteed solutions
for you or your local Builder to apply. We are Qualified Surveyors in
dampness in buildings. We offer free advice by telephone and E Mail.
1. Black Mold on walls
- wash down with our Mold
Cleanser, use our Stain
Blocking Paint where necessary, then re-paint with our Anti-Mold
Additive in your paint. Guaranteed for 5 years. Add 'trickle vents'
to window frames, or install a Dehumidifier.
2. White Salts on walls
- fluffy white salts can be neutralised using our Salt
Neutraliser, if the plaster itself is not damaged. Do not confuse
with powdery, outdoor Lime deposits.
3. Plaster damage, repairs
- bubbling, scaling, flaking plaster or render needs to be removed to
at least 300mm clear in all directions of the damp area, using a Damp
Meter to check for the furthest extent of readings. Replaster to
our Specification in sand and cement, finished with Multi-Finish, using
Renderproof in the water.
4. Plaster damage, replacement
- instead of sand and cement, particularly where washed, sharp sand
is hard to find, you can fit Mesh
Membrane. This plastic, dimpled material is fixed to the wall with
plastic sealed plugs and can be directly plastered with any type of
plaster or render. The new surface is then completely protected from
future problems. Guaranteed for 20 years.
5. Damp at the wall base
- usually caused by rainwater splash up and penetrating damp. You need
to seal the wall at the base joints (floor to wall crack) using Fillet
Seal. Then the outside wall needs to be 'tanked' using tanking slurry
- Bondacryl
mixed with fresh cement.
Also,
6. Damp Proof Course
- it may not have one - damp proofing UltraCure
cream should be injected above the splash up zone, say 250mm (10
inches) above external ground level.
7. Damp Meter - you
need one for accurate diagnosis - essential to check damp patterns and
sources in masonry and timber. We supply Damp
Meter advice and help you with analysis to solve your specific problems.
8. Humidity Meter
(electronic
hygrometer) - you need one to find out how much moisture is in the
air, particularly overnight - measure the amount of moisture in the
air inside your building and control the level using ventilation or
heating, or use a dehumidifier.
But beware - Rising
damp cannot be confirmed using a Damp Meter alone
Natural Rising damp is very,
very difficult to confirm. It requires the use of Laboratory Testing
and wall samples taken from multiple locations for each wall.
So when a local 'expert'
or 'specialist' using a so-called Damp Meter advises you that you have
Rising Damp and offers to inject and replaster the walls, ask them if
they have any qualifications and if they have read this book.
Quick
DIY Master Class in Dampness and Condensation - Click
here to buy the reprint.
This book was written by
Graham Coleman, who is a Lecturer in dampness and who has set many of
the examinations.
He confirms in his book that
a Damp Meter is not be be used to confirm that rising damp is present
and he also explains how proper tests can be performed.
In practice these tests are
rarely needed - simpler, less expensive options exist - but in 'legal'
Cases Graham is often involved as an Expert Witness.
Click
here to see our Dampness Guide for using a Damp Meter. - page 1
Click
here to see our Dampness Guide for using a Damp Meter. - page 2
Want Help
- E: Mail us at help@propertyrepairsystems.co.uk
Property Care
Association
We are long term members
of the PCA - The Property Care Association - the professional body for
the Damp Proofing industry and our Dampness Surveyors have over 50 years
of experience between them.
If you prefer to use a Contractor,
rather than our free advice service, then go to the PCA Website where
you can find the nearest qualified specialist companies. They should
give you the same information that we provide. If in doubt E Mail their
Reports to us for checking, before spending any money.
Link for the PCA - click
here.
If you'd like to
send us the details of your problem complete our Dampness
questionnaire.
Want Help
choosing a Contractor - E: Mail us at help@propertyrepairsystems.co.uk
Index
Page
| Privacy
Policy |
Returns Policy |
Contact
| Links
| Technical
References
OUR
SHOPPING PAGES
Property
Repair Systems
T: 01626 872886
E: Mail us help@propertyrepairsystems.co.uk
Site written by: David
Moore
David Moore, B.A. (Hons.),
C.T.I.S., C.R.D.S. Technical Author
Google+
Other Property Repair
Systems Sites:
www.boron.org.uk
- how to use Boron based insecticides/fungicides to treat timber rots
and insect attack
www.deck-treatment.co.uk
- how to treat patio decks and yacht decks
www.dryrot.biz
- how to kill Dry Rot in buildings
www.drywallandfloor.co.uk
- membranes for lining damp walls, floors, basements and cellars
www.epoxy-info.co.uk
- resins for repairing and sealing all types of masonry
www.fire-door-paint.co.uk
- upgrade doors to 30 minutes fire resistance
www.joist-repair.co.uk
- how to quickly repair joists and beams of any size
www.propertyrepairsystems.co.uk
- our Home Site
www.steel-fire-paint.co.uk
- treat steel with Intumescent Paint to provide fire protection
www.timber.org.uk
- systems of repair, with step by step methods
www.timber-repair.co.uk
- how to repair timber beams
www.woodworm-info.co.uk
- how to kill and prevent woodworm and death watch beetle
www.woodworm-expert-advice-forum.org.uk
- all your questions and our answers about woodworm treatment DIY
|